A Marlow company - serving West Covina, CA

Before & After Gallery - Marlow Garage Door Repair West Covina

Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

Your new garage door for as low as$59/month*On approved credit; ask for current terms

You get a price before we start. It does not change when the truck arrives.

Get your free estimate

Garage Door Before & After in West Covina, CA

Talk is cheap in this trade. A repair company can say they do clean work, but a photo of a snapped torsion spring next to a photo of a door gliding on new springs tells you more in five seconds than a brochure can in five pages. We started keeping a camera on the truck in 2002 for exactly that reason. Here’s the kind of work we do across West Covina, from the Ridgemoor hills to the flats by the West Covina Mall, and what it looks like when we’re finished.

Call (831) 216-7932

Explore

Styles & brands we work with

Recent Transformations

Torsion Spring Replacement on a Steep Driveway

Before & After: Torsion spring replacement, single-car door, South Hills area. [Photo placeholder: broken spring coil above closed door, then new spring set with door open]

The homeowner heard what he thought was a gunshot from his garage around 9 p.m. That’s what a torsion spring, the horizontal coil above your door that does most of the lifting, sounds like when it snaps under tension. We arrived next morning, removed the old spring, and installed a matched pair rated for the door’s exact weight and cycle count. He now has springs sized for 10,000-plus open-and-close cycles, and we showed him the written price before we unbolted anything.

Snapped Cable and a Door Stuck Half Open

Before & After: Cable replacement and re-alignment, two-car door, Cameron Park. [Photo placeholder: frayed cable spool and slanted door hanging uneven, then straight door with new cable]

This West Covina home had a lift cable that had been fraying for months without the owner noticing. When it finally let go, the door jammed at a 30-degree angle and wouldn’t budge. A cable on one side doing all the work while the other side is slack can bend a track fast. We replaced both cables, re-set the tension, and got the door moving straight again that afternoon. The owner kept the old frayed cable as a souvenir, which we told him was fine but not to hang it from the opener rail.

Roller Set Replacement That Quieted a Screaming Door

Before & After: Roller and hinge replacement, single-car door, Woodside neighborhood. [Photo placeholder: rusted roller with metal shavings on track, then new nylon roller set installed]

You could hear this door from the curb. The steel rollers had worn flat on one side, and every cycle ground metal dust into the track. We replaced the full set with quiet nylon rollers, cleaned the tracks, and re-balanced the door so the opener wasn’t fighting the weight. The homeowner called us back a week later not for a repair, just to say her baby started napping in the room above the garage for the first time. That one stays with me.

Service Call That Caught a Failing Opener Gear

Before & After: Opener gear inspection, single-car door, Orangewood West. [Photo placeholder: stripped gear with plastic teeth shavings in housing, then new gear installed and opener tested]

A routine spring tune-up in Orangewood West turned into a save. While testing the door’s balance, we heard a slip from the opener and opened the housing to find a stripped drive gear on its last legs. If it had failed, the door would have sat dead on a Sunday with a car trapped inside. We showed the owner the worn gear, quoted a replacement on the spot, and had the opener running quietly within the hour. This is why we don’t just tighten bolts and leave.

Track Repair After a Swung-Hard Impact

Before & After: Track straightening and bracket replacement, two-car door, Eastland area. [Photo placeholder: bowed vertical track with popped bracket, then straight track with reinforced bracket]

A moving day accident in Eastland: a box truck backed a little too close and caught the bottom edge of a door that was half up. The vertical track bent out of shape and two mounting brackets sheared clean off. We pulled the track back into true, replaced the brackets with heavier-gauge steel, and checked every roller for bite marks. The door opens smoother now than it did the day before the truck hit it.

Weather Seal Replacement Along the Bottom Corner

Before & After: Bottom seal replacement, single-car door, Galster Wilderness edge. [Photo placeholder: cracked rubber seal with daylight showing through gap, then new seal with clean flush fit]

This call came in for a door that “worked fine but felt warmer than it should.” Along the edge of a home near the Galster Wilderness hills, the rubber bottom seal had cracked and curled away, leaving a half-inch gap. That gap lets in dust, mice, and in summer, the kind of heat West Covina does not need help producing. We replaced the seal along the full width and re-leveled the door so the gap closed evenly. The fix took under an hour and cost less than a dinner for two.

Want Results Like These?

Every job above started with a phone call and ended with a written price honored to the dollar. If your garage door is loud, slow, or just not moving right, call Marlow Garage Door Repair West Covina at (831) 216-7932. Book online, see your tech on the way, and get a written price before any work begins. We’ve been fixing doors across this city since 2002, and every repair carries the 365-Day Done Right Promise.

Written by Jaylen Ross, Owner at Marlow Garage Door Repair West Covina, serving West Covina since 2002.

Before & after

See the difference